VIEW EDIT CART 817 726-7525  or  817 506-0007 DISCLAIMER
 
 


 
Tamisium Extractors
TamiE
TM
 
 
Accessory Kits
 
A superior way to extract botanicals and essential oils
 

 

 

 


Butane Solvent, Recovery Kits and other Accessory Options

 

ACQUIRING BUTANE AND OTHER SOLVENTS

Butane may be controlled to some degree in the state you live in. Since we are not aware of all the laws in all the states, we can not recommend or supply any solvents to you. It is up to you to learn about the rules and regulations of the state and country you live in regarding solvents.
There are many solvents that can be used in a Tamisium Extractor. I have used Butane for extracting chemicals and oils from plants for over 5 years in the state of Texas but it is not the only one I have used in this extractor.
We obtain Butane from the AirGas Specialty Gas Department. We obtain other solvents from various Laboratory Supply Facilities in Texas to avoid shipping chargs. They usually require a permit or some form of business document stating the intended purpose for the apparatus and or solvents purchased.

______________________________________________________

 

Solvent Recovery Kits for Large Production Extractors
for Large Production Tamisium Extractors

Heating Jackets

Recovery will recapture approximately 1 gallon of butane every 1.5 hours.
We use custom designed heating jackets for each size tank.
We use a Lab Grade Cold Chamber/Freezer or Chilling Jacket. Depending upon your desired configuration.
Included is an automated panel that closes and opens valves based on time and temperature. Fully automating the extraction and recovery process.
We provide the heating and chilling equipment and they are included with the Large Production Models.
Should you need to buy one separately, the cost of these jackets vary by size for each model extractor. Priced by the square foot and you can elect to include or not include the automation control panel or ACP.

You can elect to use lab grade vacuum pumps to speed up recovery but you may not want to set there and observe the recovery process into the late evening as is required when using vacuum pumps. Remember, If you start the extraction at 8 am, you will most likely be ready to recover the solvent by 1-2 pm. Even with a vacuum recovery set up, it will still take about 4-6 hours to recover 8-10 gallons of butane. And those pumps are not cheap.
When using our proprietary heating jackets on temperature monitoring timers, you can set it up to run over night and it will be completed by the next day when you return to start another extraction. So why use pumps that you have to monitor when you could be sleeping. Let a second shift work for you by allowing the extractor to do what is was designed to do. Both methods deliver an empty extractor in the morning to be used again.


______________________________________________________

 

Accessory Kits
For the Table Top Tamisium Extractors

Table Top Tamisium Extractor Accessories
PHOTO AND DESCRIPTION
USD PRICE

UPGRADE TO THE NEW BALL VALVES BY EXCHANGING YOUR OLD BALL VALVES
FOR NEW ONES.

Simply send in your old ball valves with the black handles and a money order or check for $75.
The new ball valves with the yellow handles will be mailed to you shipping included.
The price is at cost with the exchange credit for the old ball valves, so be sure and send them in.
You can also call in your credit card information or email your cc details for the charge.
No need to wait. Once the charge is paid, the new ball valves will be sent.
You will have 10 days to return the older style or you will be billed the at cost price minus the credit.


Buy ONE Single Ball Valve ( yellow handles)
1/4" MNPT X 1/4" MNPT with Teflon Seals, 1000 psi rated. Lab Grade Quality. Yellow Easy to Grip Handles.
$38.99
SAFETY QUICK DISCONNECT SETS
STANDARD PACKAGE
Includes 3 couplers & 3 nipples 

 

STANDARD PACKAGE SAFETY QUICK DISCONNECTS
BRASS

These QDs will stop flow upon disconnection if you forget to close the ball valves on your extractor or recovery tanks.
1 Brass Coupler for Extractor
2 Brass Couplers for Recovery Line
3 Brass Nipples for Extractor

 
$79

 

STANDARD PACKAGE SAFETY QUICK DISCONNECTS
STAINLESS STEEL

These QDs will stop flow upon disconnection if you forget to close the ball valves on your extractor or recovery tanks.
1 Stainless Coupler for Extractor
2 Stainless Couplers for Recovery Line
3 Stainless Nipples for Extractor

 
$179
SAFETY QUICK DISCONNECT SETS
DELUXE AND SUPER DELUXE PACKAGE
Includes 6 couplers & 3 nipples

 

DELUXE and SUPER DELUXE - SAFETY QUICK DISCONNECTS
BRASS

These QDs will stop flow upon disconnection if you forget to close the ball valves on your extractor or recovery tanks.
1 Brass Coupler for Extractor
2 Brass Couplers for Recovery Line
1 Brass Coupler for Gauge,
1 Brass Coupler for Safety Purge Line
1 Brass Coupler for Schrader Valve Air Adaptor
3 Brass Nipples for Extractor

 
$109

 

DELUXE and SUPER DELUXE - SAFETY QUICK DISCONNECTS
STAINLESS STEEL

These QDs will stop flow upon disconnection if you forget to close the ball valves on your extractor or recovery tanks.
1 STAINLESS coupler for Extractor
2 STAINLESS couplers for Recovery Line
1 STAINLESS coupler for Gauge,
1 STAINLESS coupler for Safety Purge Line
1 STAINLESS coupler for Schrader Valve Air Adaptor
3 STAINLESS nipples for Extractor

 
$299
ADD A SINGLE SAFETY QD  
BRASS Safety Quick Disonnect - 1/4" COUPLER
Add a Safety Quick Disconnect to any accessory one at a time. This is the Female Coupler that fits the Male Nipple. Both Nipple and Coupler are 1/4 inch Male Pipe Threaded to fit Tamisium Extractors.
$16.99
 
BRASS Safety Quick Disonnect - 1/4" NIPPLE
Add a Safety Quick Disconnect to any accessory one at a time. This is the Male Nipple that fits inside the
Female Coupler. Both Nipple and Coupler are 1/4 inch Male Pipe Threaded to fit Tamisium Extractors.
$9.99
 
STAINLESS STEEL Safety Quick Disonnect - 1/4" COUPLER
Add a Safety Quick Disconnect to any accessory one at a time. This is the Female Coupler that fits the Male Nipple. Both Nipple and Coupler are 1/4 inch Male Pipe Threaded to fit Tamisium Extractors.
$42.99
 
STAINLESS STEEL Safety Quick Disonnect - 1/4" NIPPLE
Add a Safety Quick Disconnect to any accessory one at a time. This is the Male Nipple that fits inside the
Female Coupler. Both Nipple and Coupler are 1/4 inch Male Pipe Threaded to fit Tamisium Extractors.
$21.99
 
CUSTOM FITTED CONNECTIONS WITH PRESSURE TEST
We will custom fit all your Ball Valves and Quick Disconnects using the proper Vices and Torque. After we fit all the Ball Valves and Quick Disconnects, we will pressure test your Extractor and check it for leaks. Make sure you have no problems by having us do what we have done hundreds of times. And have a ready to use extractor when it arrives at your door.
$40
 OTHER ACCESSORIES

Laser Thermometer
We use this thermometer to check when solvent recovery is complete. Without it you will have to remove and weigh the Recovery Tank when you think the Recovery Tank has collecfted all the solvent you began with. By monitoring the temperatue drop you can establish a completion of solvent condensing.
    
$69.00
 
Pressure Gauge with BRASS QD Coupler
200 psi oil filled, Comes with BRASS Quick Disconnect (1/4" MNPT)
$29.99
 
Pressure Gauge with BRASS SAFETY QD Coupler
200 psi oil filled, Comes with BRASS SAFETY Quick Disconnect (1/4" MNPT)
$59.99
 
Pressure Gauge with STAINLESS SAFETY QD Coupler
200 psi oil filled, Comes with STAINLESS SAFETY Quick Disconnect (1/4" MNPT)
$79.99
 

 

Safety Purge Line with Brass QD
20 ft with 1/4 inch Quick Disconnect. Use with Standard QDs on Extractor Tank or RC Tank.
These QDs will not interchange with Safety QDs
.
 $15.99
 

 

Safety Purge Line with Brass SAFETY QD Coupler
20 ft Purge Line with 1/4 inch Brass SAFETY Quick Disconnect.
You can use this Safety Purge Line with SAFETY QDs on Extractor Tank or RC Tank.
Brass Safety QDs will interchange with Stainless Safety QDs.
$26.99
 

 

Safety Purge Line with Stainless SAFETY QD Coupler
20 ft Black Purge Line with 1/4 inch Stainless SAFETY Quick Disconnect for easy line replacement.
You can use this Safety Purge Line with SAFETY QDs on Extractor Tank or RC Tank.
Brass Safety QDs will interchange with Stainless Safety QDs.
$54.99
 

 

Teflon Sealing Tape
( 260 foot x 1/2 inch )
$1.49
 
Granulated Activated Charcoal ( 1 pound )
This is not your average pet store Charcoal. The Granules are consistent in size and porosity and made specifically for lab filtering applications. It is specially treated for extra purity, non-toxic and safe to use.
$18.99
 

 

O-Rings for Extractor Tank only (larger o-ring)
For 2 OZ Tamisium Extractor Tank (10 pack)
$14.99
 

 

O-Rings for Extractor Column and RC Tank
For 2 OZ Tamisium Extractor Column / Rec overy Tank (10 pack)
$9.99
 

 

Extra Teflon Butane Nozzle Adaptors
For Disposable Solvent Canisters ( Teflon )
$15.99
 

 

D Limonene ( 1 gallon ) NOT IN STOCK
Used to replace Naphtha when washing or transporting oils. A fairly non toxic subsitute with comparable/better evaporation rates to Naphtha, No Has Mat Fees and some consider superior cleaning abilities.
$44.99
 

 

Hard Carry Case with Adjust to Fit Foam Insert
For 2 oz Extractor and Recovery Tank with Recovery Line setup
$79.99
 

 

Schrader Valve - High Pressure and Chemical Rated
Used to add pressure safely to any tank or all tanks when assembled. Only comes in 1/4 inch Brass without QD.
This valve is not an automotive Valve. It is the same size and can be used with any automotive air compressor but the chemical ratings on the seals and pressure ratings on this valve far exceed the pressure ratings of your typical Schrader Valves found on car tires. DONT TRY TO USE ANYTHING ELSE TO ADD PRESSURE!
$12.99
 
 

 

 

MORE ACCESSORIES COMING SOON

 Disposable Butane Canisters

Weight Scale in Grams; Various Sizes

Filter Disks

Internal Charcoal Insert Canisters

Heating Mantles

Separatory Funnels

Accessory Soft Case

Beakers

Quick Disconnect Options/Replacments - Stainless, Brass Nickel Plated, Brass Chrome Plated

Ball Valves Options/Replacments - Stainless, Brass Nickel Plated, Brass Chrome Plated

 

 All of the prices on this site are in USD.

 

______________________________________________________

 

Please remember that most solvents are flamable. When opening and closing any of the extractors, please do so in a well ventilated, spark free environment. The smaller units can be taken outside. Know the properties of the solvents being used for any process of any extraction with any apparatus. Before disconnecting quick disconnects, make sure they BALL VALVES ARE CLOSED!. Double and triple check !! and again, only disconnect in a well ventilated area free from pilot lights and sparks or any other ignition sources.