LICENSING RIGHTS FOR SALE
As indicated on phone calls and emails, we are not leasing or building the Productioin Tamisium Extractors.
Exclusive Rights to build, use and sale the production models will be sold this year. You may contact the license holder in your area at that time to discuss purchase, or lease contract.
We are still reviewing and accepting offers however, there are tentative contracts currently under negotiation here in the USA, AUSTRALIA, CHINA and CANADA. All inquiries and support will be handled at this site or redirected to a trained professional.
I wanted to extend an apology to all of you that have sent in deposits for Production Models. These deposits have been refunded or will be refunded shortly.
The licensing agreement will not effect the support, production or sale of the Table Top Tamisium Extractors.
Please read the articles in the following publications regarding the performance of the Tamisium Extraction Process using the Table Top Extractor. The article will be published in the following publications after June 15th.
In addition to the publication of the above article, a FOR SALE AD will be run concurrent in the same publications and in the following months offering the Licensing Rights for sale.
PUBLICATION LIST WILL BE POSTED ON JUNE 15TH
Large Production Tamisium Extractors
Custom built or you can select from the sizes below.
1 kilo capacity (2.2 pound) extractor or 2.5 kilo capacity ( 5.5 pound) extractor.
scroll down for prices
Large Production Tamisium Butane Oil Extractors
- A 2.5 kilo extractor will extract and recover the solvent for resuse every 24 hours which makes it the perfect size for commercial production.
- TEN 2.5 kilo extractors can be set up side by side in a 2' x 20' space and easily operated by one employee.
The larger Tamisium Butane Oil Extractors are Production models capable of extracting from over 5 pounds of plant material and recovering up to 10 gallons of solvent every 24 hour cycle. Capable of extracting multiple or targeted isolated polarities using preset and fully automated pressure, time and temperature set parameters.
The Extractors have patent pending designs and processes / internal venting systems to eliminate external lines and therefore eliminate the chance of those lines leaking. Pressure Differentials created by Temperature Differentials move the liquid through the extractor from and to any chamber with great force and speed if needed. You can easily move solvent through the most tightly packed column of plant material for greatest efficiency.
Sensor driven actuator valves controlled by temperature sensor timers are now standard features on the new systems.
These sensors will monitor temperature and time. This new patent pending design/process will allow one to set up the extractor to extract and recover the solvents with minimal or no supervision. After a 30 minute set up in the morning, you can come back the next morning, gather your extract and set it up to run again with new material. A light will come on to indicate completion of the extraction and solvent recovery process. Extraction time, pressure and temperatures are fully automated in each isolated chamber of the extractor along with fully automated cleaning and recovery of the solvent for reuse.
Safety shut offs are incorporated in the system should anything fail. It has a safer reverse double reduncy safety system which means if anything fails, the valves close and the power shuts off to the heat and chilling sources. No more than 90F is required to recover butane solvent. Although with a properly chilled condenser tank, you can expedite recovery by increasing temperate to 110F. Low recovery temperatures are what make butane so ideal for fragile delicate volatile oils / fragrances / aromatics. The method to extract components not extracted with butane alone are included in the process.
Production Tamisium Butane Extractor |
| Column Capacity |
US gallons |
US pounds
|
KILOS |
| 10 Liter Column |
2.5 gallon column |
5.5 pound column |
2.5 kilos |
| with 50 liter solvent tanks and recovery tanks |
Automatic Timer and Temperture Sensor Controlled - FULLY AUTOMATED |
| |
| 5 Liter Column |
1 gallon |
2.2 pound column |
1 kilo |
| with 25 liter solvent tanks and recovery tanks |
Automatic Timer and Temperture Sensor Controlled - FULLY AUTOMATED |
Column capacity represents the volume of plant material you can extract from with that particular size extractor.
The weights are a guide to help you find the desired coarseness you need to have your plant material ground to in order to occupy the given space for an efficient extraction to occur.
Each column represents 1/4 the volume of the solvent required to extract from the column when full.
In other words. The solvent tanks are 4 times larger than the column that holds the organic material being extracted.
( 1 gallon translates into 1 kilo of material capacity with most dried botanicals when ground up to the proper coarseness )
|
