COUPON CODE "SAVE250"
Sales runs till end of year or until supplies are liquidated

"Add Carry Case" Checking the Add Carry Case box above will add the carry case to your order at the discounted price of $89.00. Your extractor will ship in the carry/protector case when you add the carry case to your order by checking the box above.
You can combine the coupon and discounted carry case price.

"Add Assembly" It is highly recommended! Checking this box above will add the assembly to your total. We will then assemble seal and pressure check your sealed extractor and accessories.
Coupon CODE does not include Assembly.

TE175-VRV Wide Mouth Super Deluxe System + Extra RC Tank Package - $2140.00

WIDE MOUTH FOR EASY ACCESS TO EXTRACTED MATERIAL.
CLOSED SYSTEM with Safety Vent Relief Valve.

This Package includes:
TAMISIUM BUTANE EXTRACTOR and RECOVERY SYSTEM.
AND INCLUDES THE EXTRA RC TANKS RAPID RECOVERY SYSTEM
DOES NOT INCLUDE THE HEATING SYSTEM

COMES WITH STAINLESS SAFETY QUICK DISCONNECTS AS PICTURED AND ALL ACCESSORY PACKAGE

This extractor has an extraction capacity of 2+ ounces via (175 ml) Column. Holding a maximum liquid capacity of 700 ml in the Extractor Tank and 700 ml Recovery. Extract as fast or slow as you desire, recovery of solvent takes 2-4 hours. Times vary based on if you use an extra recovery tank or not and other variable factors.

The Column Base shown here demonstrates the mass of material and quality of workmanship that goes into every part we make. The lid to the column sets in front of the column base. Notice the protruding surface that locks the column onto the tank that it rest upon. On this protrusion you will see the drip ring on. This is placed on the underside of the base to prevent any solvent and extract from running into the sealing area. This protects the seals and helps reduce cleaning in. This also ensure that all your extract ends up in the bottom of your collection tank and not on the tank ceiling and walls. You can be sure that every aspect of this design takes into consideration all points of efficiency and performance. These same features are carried over onto the new WIDE MOUTH DESIGNS

• NEW UPGRADED DESIGN with an upgraded tank design which allows
• MORE SOLVENT CAPACITY for an increased extraction efficiency to get that extra 3-5% yield
• INCREASED AIR BUFFER ZONE to allow more consistent recovery times
• RAISED TANK BASE to allow better cooling and heating of the tank bottoms.
• EXTENDED 1/4" FITTINGS for ease of use when opening and closing valves
• VRVI - Inline Vented Safety Pressure Relief Valve set at 125 PSI to safely relieve excess pressure

ADDITIONAL ACCESSORIES AVAILABLE

• Clear Lexan Lid for vacuum removal of any and all solvents.
• Extra Lower Extractor Tank available for separating your Vaccum process from the Extraction Process so you can extract simultaneously.
• Heating pad to apply heat directly to the bottom of the extractor tank for drying extracts and or to facilitate lowering viscocity during vacuum removal of solvents.

• Perform the same extraction you are now plus 1000s more, safely while recovering the solvent for reuse.
• Recovery Tank is used as Solvent Delivery Tank and Solvent Condenser Tank
• Recovery Tank holds 700 ml max liquid volume or 400 grams of pure N Butane plus an additional air buffer zone for better efficiency during recovery of the solvent. Included on every RC Tank is a VRV Safety Pressure Relief Valve.
• The Extractor Tank also holds 700 ml max safe liquid volume capacity.
• Plant Column holds 2+ ounces plant weight in a 700 ml volume space. Grind your material finder and add more plant material for a high density extraction, up to 2 ounces.
• The RC Tank also allows the use of other solvents in combination with Butane during the same extraction and doubles as a condenser tank to recover the solvent for reuse. Easy on off lid allows quick easy access to contents inside the tank.
• Comes as a complete recovery system with Accessory Tank, connections, lines and all Accessories and Fully Illustrated Manual and Lifetime Support;

Every TE175VRV System Comes with these additional accessories

• STAINLESS STEEL SAFETY QUICK DISCONNECTS- 6 couplers and 3 nipples.
• (SPL) Safety Purge Line with Dual QDs - SAFETY Quick Disconnect
• One Nickel Plated 1/4" QD to replace line if needed
• One STAINLESS SAFETY QUICK DISCONNECT for easy removal of SPL from Tank being purged When using any Safety QD setup, you can not purge any part of the extractor without a Safety Purge Line. This is a built in safety feature to prevent accidental discharge. Included with every Purchase.
• Pressure Gauge with STAINLESS SAFETY QD
• High Pressure Chemical Rated Schrader Valve Adaptor with STAINLESS SAFETY QD to add minimal pressure to your extractor.
• Laser Thermometer, Easy shoot with laser for temp reading.
• Sealing Tape, * 10 pack of all 3 sizes of O-Rings
• Teflon Nozzle adaptor for disposable solvent canisters with FREE Safety Quick Disconnect.

optional: 3 CUSTOM DESIGNED FITTED HEATING JACKETS & ADVANCED CONTROLLER

These Heating Jackets are custom fit to each tank and designed with carefully tested wattages and materials to ensure perfect function for the Tamisium Extraction Process. You get 3 heating jackets in all and one Advanced Controller that will learn your demands and maintain a +- 1 degree accuracy. The 1st Heating Jacket is designed to fit and work with the Solvent Recovery Tank so you can heat your solvent before extracting and hold that temperature during the extraction process. This allows you to perform a heated extraction with incredible accuracy.

The 2nd Heating Jacket is designed to fit and work with the column so you can heat your plant material for heated extractions and then Heat your Column of plant material during recovery to make sure you evaporate even the solvent that absorbed into the plant material during extraction.
The 3rd Heating Jacket is designed to fit and work with the Extraction/Evaporator Tank to evaporate the solvent during recovery.

To control all these jackets you will receive an Advanced Digital Controller that will hold temperature to within 1 degree. This controller has been programmed to work with the rigors of the butane chilling effects created during evaporation of butane. The controller incorporates constant variable power rather than an on off system and uses a learning phase. This allows extreme accuracy and repeatability for specific extraction parameters. This single controller controls two jackets at one time and allows for different target temperatures for each tank. There is no extraction or recovery process that requires heating more than 2 tanks at the same time. Operation Manual included. 110V

TE175 EXTRACTOR IS FOR MAKING CONSUMABLE PRODUCTS AND IS FITTED WITH STAINLESS STEEL FITTINGS ALL THE WAY THROUGH. IT COMES WITH EVERY ACCESSORY YOU NEED TO PERFORM ANY EXTRACTION THIS SYSTEM IS CAPABLE OF. YOU CAN ADD A HEATING SYSTEM AND EXTRA RECOVERY TANK TO CUT YOUR EXTRACTION AND RECOVERY TIMES IN HALF. ADDING THESE WOULD BE CALLED THE "TOTAL PACKAGE"

Write a review