TE700 is a Half Pound Commercial Intro size.

CLOSED PASSIVE SYSTEM that does not need to continuously loop solvent. The tanks hold an adequate amount of solvent to completely extract in one pass and passively recovers all the solvent for reuses without the aid of any pumps.
Extractions and full solvent recovery can be as fast as 30 minutes. Holding all the solvent needed allows you to prepare the solvent in such a way that you can extract anything and everything from anything.

Any Tamisium Extractor can extract up to 95-98% of the oils or non polar compounds from plant material.
If you want to know how much it can extract out in grams then you have to know how much in grams is in the plant material. Regardless it has the highest yield of non polar oils extracted out of any hydrocarbon cold recovering rpocess, By comparison it is your best option.

It can also extract our 80-85% of the polar compounds by adding a co solvent. You can do this at the same time or in a separate extraction on the same material you just extracted. The cost to run the system is so low you can run it 4 times before you approach the cost of a SCF CO2 extraction process.

By comparison

• Extract almost 3x faster,
• at 1/4 the cost to operate,
• with higher yields,
• with easier control in targeting specific compounds
• at less than half the initial upstart cost for equipment
• without the same headache of cleaning equipment or repairing pumps.

All this is due to the facts that you are using a Liquid Solvent at low pressure and can recover without the aid of additional pumps. If you are looking at a apparatus that requires additional pumps to recover a low pressure solvent then you are looking at a pirated system in which the designer failed to grasp some key concepts in the way our tanks and column are designed. Quality of the finished product is equal or better due to the fact that you can control the solvent types, solvent temp and contact time and pressure. This system allows you to max out these controls or turn them off completely.

TE700 above is shown with the optional Extra Recovery Tank and optional Heating System attached. This package is discounted and is called the Total Package and can be found on the left of every page.

All Tamisium Systems will allow you to extract and recover the solvent for reuse.

Adding an extra RC Tank allows you to recover twice as fast versus one RC tank. The added Tank also assist you in the extraction process. Desribed in the included illustrated manual.

Adding the Heating System allows you to perfrom controlled heated extractions and Recover more easily.

There is also a Vacuum Pkg that can be added to any TE700 Extractor pkg. This Vacuum Pkg allows you to vacuum solvent or oils away and dry your finished product. IT is not to be mistaken as the solvent recovery system included with every Tamisium Extractor.

PRICING for TE700-VRVI2600 System with with and without Optional Accessories can be found on the purchase pages found by clicking on the appropriate links on the left of every page.

Shipping is added during checkout ($65) to anywhere USA. - Includes Assembly and Pressure Check! ($45) (Shipping may vary for foreign orders)

Bank Transfers Checks or Money Orders are the only forms of Payments taken for the Tamisium Extractors
You purchase just like any other online process. Add the item to your shopping cart and checkout.

You have the following purchase options.
These purchase pages can be found to the left in the Nav area under TE700 (8 ounce)

TE700 Extractor Wide Mouth Series
TE700 Extractor with Extra RC Tank
TE700 Extractor with Advanced Heating System
TE700 Total Pkg with Advanced Heating System and Extra RC Tank