TE175 ADVANCED HEATING SYSTEM

3 CUSTOM DESIGNED FITTED HEATING JACKETS & ADVANCED CONTROLLER

These Heating Jackets are custom fit to each tank and designed with carefully tested wattages and materials to ensure perfect function for the Tamisium Extraction Process. You get 3 heating jackets in all and one Advanced Controller that will learn your demands and maintain a +- 1 degree accuracy.

1. The 1st Heating Jacket is designed to fit and work with the Solvent Recovery Tank so you can add heat to your solvent or tank before extracting and hold that temperature during the extraction process. Heat allows you to perform cold or hot extractions because butane does not produce pressure when cold until heat is applied to the tank. This allows you to create the propellant pressure you need to perform a sub freezing or raise the temp to perform a heated extraction with incredible accuracy.
2. The 2nd Heating Jacket is designed to fit and work with  the column so you can heat your plant material for heated extractions and then Heat your Column of plant material during recovery to make sure you evaporate even the solvent that absorbed into the plant material during extraction.
3. The 3rd Heating Jacket is designed to fit and work with the Extraction/Evaporator Tank to evaporate the solvent during recovery.
4. To control all these jackets you will receive an Advanced Digital Controller that will hold temperature to within 1 degree. This controller has been programmed to work with the rigors of the butane chilling effects created during evaporation of butane. The controller incorporates constant variable power rather than an on off system and uses a learning phase. This allows extreme accuracy and repeatability for specific extraction parameters. This single controller controls two jackets at one time and allows for different target temperatures for each tank. There is no extraction or recovery process that requires heating more than 2 tanks at the same time. Operation Manual included. 110V

Write a review