Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

TE700 Accessories Bundle - Heating System and Extra RC Tank

TE700 Accessories Bundle - Heating System and Extra RC Tank
TE700 Accessories Bundle - Heating System and Extra RC Tank TE700 Accessories Bundle - Heating System and Extra RC Tank TE700 Accessories Bundle - Heating System and Extra RC Tank
Product Code: TE700 Accessories Bundle
Availability: In Stock
Price: $3,590.00

Available Options

International Shipping:

   - OR -   

If you already have a TE700 Extractor and want to outfit it with the latest accessories you can do that at a discount with this Accessory Package.



These Heating Jackets are custom fit to each tank and designed with carefully tested wattages and materials to ensure perfect function for the Tamisium Extraction Process. You get 3 heating jackets in all and one Advanced Controller that will learn your demands and maintain a +- 1 degree accuracy. The 1st Heating Jacket is designed to fit and work with the Solvent Recovery Tank so you can heat your solvent before extracting and hold that temperature during the extraction process. This allows you to perform a heated extraction with incredible accuracy.

The 2nd Heating Jacket is designed to fit and work with the column so you can heat your plant material for heated extractions and then Heat your Column of plant material during recovery to make sure you evaporate even the solvent that absorbed into the plant material during extraction.
The 3rd Heating Jacket is designed to fit and work with the Extraction/Evaporator Tank to evaporate the solvent during recovery.

To control all these jackets you will receive an Advanced Digital Controller that will hold temperature to within 1 degree. This controller has been programmed to work with the rigors of the butane chilling effects created during evaporation of butane. The controller incorporates constant variable power rather than an on off system and uses a learning phase. This allows extreme accuracy and repeatability for specific extraction parameters. This single controller controls two jackets at one time and allows for different target temperatures for each tank. There is no extraction or recovery process that requires heating more than 2 tanks at the same time. Operation Manual included. 110V

Extra Recovery Tank

Your Extra Recovery Tank will come pressure checked and assembled with 2 ball valves and 2 Safety Quick Disconnect Male Nipples just like the one in the TE700 system.

In addition to that you will receive a Teflon Core Caustic Chemical Rated High Pressure Braided Stainless Steel Reinforced Recovery Line with 2 Stainless Steel Safety Quick Disconnect Couplers to allow you to connect to your current Recovery Tank to run them in series in your Freezer or Cold Bath.
New Tanks are fitted with a Vented Safety Pressure Relief Valve to relieve pressure in the event that the tank is over heated and or over filled. Set to 125 psi

Why an extra Recovery Tank? If you take a close look at the TE8000 you will notice that system uses a Recovery Tank to send the solvent through the column and at the same time it uses another Recovery Tank placed in a Freezer to pull the solvent through the column for use during cold extractions.

This extra tank also allows you to keep your butane when purging versus letting it go through the safety purge line. If you use this second Recovery Tank to create the vacuum you will not need to reduce the temperature of your Extractor Tank. Reducing the temperature and therefore the pressure of your Extra Recovery Tank while it is connected to your Extractor Tank will create the same vacuumor reduced temperature in your Extractor Tank because the two Tanks and their atmospheres are open to each other while one is being chilled. In addition, you will be recovering your solvent while you are extracting from your plant material.

If that was not enough to make you purchase an additional Recovery Tank, then listen to this. After your Recovery Tank on top is empty of all the solvent, you can now remove it and place it in the freezer or cold bath along side the Recovery Tank already recovering solvent in the Freezer or Cold Bath. When you hook both those tanks together in series while in the freezer you have doubled your Condensation Surface area. This increased Surface area condensing vapor into liquid will greatly increase the speed of Evaporation and Solvent Recovery as long as your heating system can keep up with the extra cooling created with all this evaporation going on.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Sitemap - Privacy Policy - Terms Of Service